Ingco Non-Medical Face Mask HDM01 / HDM21

Model: HDM01

Specification

Brand: Ingco

Standard Compliance: EN 149:2001 CE0121

Class: FFP2

Material: Includes activated carbon fiber

Maximum Humidity: 70%

Temperature Range: +5C to +38C

Applications: Protection against organic vapors, ozone, acetylene, electric welding, oxycutting, and grinding.

Directions for Use:

Place the mask over your mouth and nose. Ensure a proper seal before entering the work area.

Wear the mask at all times in contaminated areas; do not remove it.

After leaving the contaminated area, remove and discard the mask.

If you experience breathing difficulties due to clogging, replace the mask with a new one.

Use in accordance with occupational health and safety regulations.

Designed for single-use only; discard after removal.

If feeling unwell or drowsy, leave the work area immediately.

Store masks in a dust, moisture, and contaminant-free area, in a temperature range of +5C to +38C.

Limitations:

Do not enter areas where oxygen concentration is less than 17% (VK-19%).

Do not enter if contaminant concentrations are unknown.

Do not use if particulate concentrations exceed applicable health and safety regulations or the protection factor multiplied by the nominal protection factor (NPF), whichever is lower.

Features:

• Effective Protection: Offers reliable filtration against harmful particles and vapors.
• Comfortable Fit: Designed for ease of use during prolonged wear.
• Single-Use Design: Ensures hygiene and safety by preventing reuse.